AUDI B5- AUDI 2.7 Single Turbo Kit AS SEEN ON THE NET FROM PB5
-A simple kit that allows fitting of a rear mounted single turbocharger, whilst still keeping the factory firewall in-tact on the B5 S4 & C5 A6/AR
Units were designed for usage of PTE (Precision) Vband Turbine Housings & the Tial 44mm MVR wastegate (standard Tial 44mm will not fit!).
Please choose your supporting mods accordingly!
*Designed to bolt up to Audi N/A 2.8 30V Exhaust Manifolds
-TIG welded 321 Stainless construction all around
-2" Up-Pipe Manifold (2x Primary O2Bungs/plugs w/ EGT's deleted)
-1.75" Atmospheric Dumptube
-3.5" 2-Part Downpipe (Additional O2Bung for WBO2, both secondaries/plugs)
*Please understand with the initial converting to a STK setup you need to expect re-routing, re-wiring, minor clearancing of intake manifold, heat shielding odds/ends, etc etc. This is a basic kit to provide the essentials needed for one to "ditch the twins."
We believe simplification is key in regards to maintaining/keeping a happy healthy 2.7 and strongly advocate the STK conversion.
Our products are developed
and intended for off-road racing.
They may not be legal for use on public highways where pollution
control laws apply.
Due to the nature of the use of these products, no warranty
is implied or given.