Fax or phone in your order then visit
the PayPal website to sign up & make payment!
COILOVER HONDA CIVIC 96-00 EK / EM
Prod.# COILOVER HONDA CIVIC 96-00 EK / EM
Mono-tube shock design
30 levels of damping force adjustment, adjust compression/rebound 2 axis bushings allow precise, single wrench adjustment accurately under load.
Front Spring Rate: 10kg/mm Rear Spring Rate: 6kg/mm
Front Camber Plates Not Applicable, Rear Camber Plates Not Applicable
Separate full length height adjustable, 1 year warranty and rebuildable
Series: XS-P Coilover Kit 96-00 Honda Civic (EK/EM) Rear Fork. Please verify your chassis code before ordering.
These are not your "EBay" knock off coilovers , these are the real deal! Series: XS-P Suspension makes high quality Coilovers!
The Series: XS-P coilovers use a large 44mm diameter piston in a 53mm diameter damper body to maximize oil capacity. As the damper unit operates the oil contained within heats up. The viscosity of oil changes as its temperature varies which can lead to changes in the damping characteristics of the unit.
Series: XS-P only use a very high quality oil with their coilovers but go that extra mile to maximize performance and build their Series: XS-P range with a large 53mm diameter damper body. This increases the capacity of the unit which increases the volume of oil contained which in turn reduces the peak temperature and so significantly improves damper performance.
Pillowball Upper Mount
Camber adjustable top mounts (Front & Rear Camber Plates are not available for this vehicle)
Aluminum top plates
30 Way Adjustable Damping (Rebound & Compression)
Adjustable spring platform
Height adjustment via bottom mount to retain full damper travel
Patented Concave Lower locking collar to prevent the bottom mount becoming loose
Bearing mounted upper front spring platform
Damper units are black chromed steel to give superb durability even in the harshest Winters.
High quality SAE9254 high strength durable cold wound steel springs
Dust boot to protect damper seals
Series: XS-P - Designed for street and track
Top Mount Type: Front Pillowball Mounts , Rear Rubber Mounts *RA Type* (Pillowball Mounts for the Front & Rear are available along with Rubber Mounts for Front & Rear are available, contact us)
Front Spring Rate:180mm (Spring Height) 10kg/mm (560bs/in)
Rear Spring Rate: 180mm (Spring Height) 6kg/mm (336lbs/in)
Our products are developed
and intended for off-road racing.
They may not be legal for use on public highways where pollution
control laws apply.
Due to the nature of the use of these products, no warranty
is implied or given.