The Apexi Auto Timer allows the vehicle
to idle for a preset amount of time after
the ignition key has been removed. In turbocharged
vehicles this prevents hot oil in the engine
from coking up in the lines. Hard driving
can raise engine oil temperatures to dangerously
high levels. Proper cool down is essential
for a healthy turbo and engine
The Auto Timer stands as a technological
marvel. The pen shaped, compact size makes
the Auto Timer one of the smallest turbo
timers on the market. This allows a clean
and stylish installation virtually anywhere
inside the car. The unique multi angle joystick
button allows easy navigation through the
many feature menus
Upgraded in every way from the previous
model, the new Auto Timer can automatically
determine the necessary amount of after
idling time
A Manual Mode allows the user to preset
desired idling times from 0 sec.~10 minutes
in 16 increments. By inputting O2 sensor
voltage, the Timer can also display theoretical
air fuel ratio
Since the Auto Timer uses the factory
O2 sensor which is primarily designed for
emissions, the readings may not be as accurate
as racing air/fuel ratio monitors. The Timer
can also display critical data such as O2
sensor voltage and Battery Voltage
To prevent potential theft while running,
the handbrake safety feature shuts off the
vehicle when the handbrake is released without
the ignition key
First time to utilize O2 sensor voltage
to calculate the necessary amount of after
idling time automatically
144 different settings to ensure the most
optimum countdown setting from the widest
array of vehicle
16 way adjustment of countdown timing
from 0-10 minutes
O2 sensor voltage - A/F value can be displayed
Displays A/F ration as RICH or LEAN
Displays battery voltage. Also warns of
extremely LOW battery voltages
Our products are developed
and intended for off-road racing.
They may not be legal for use on public highways where pollution
control laws apply.
Due to the nature of the use of these products, no warranty
is implied or given.