SAMCO SILICONE RUBBER HOSE PIPE DUMP VALVE AIR/WATER/BOOST TEE
T Piece Dump Valve Silicone Hose -Rubber Coolant Joiner Pipe Tee Blue 50.8mm 2"
Allows Easy Fitment Of Dump Valve
Hand Manufactured To Exacting Standards
Made From The Highest Quality Silicones
Available In Large Range Of Colours And Sizes
Used By F1 And WRC Teams
Max Tempertature 180 Degrees C
Samco Silicone Hose T Pieces are made to the highest standards and are available in a range of colours and sizes from 38mm to 76mm. They have been designed to allow easy fitment of dump valves into turbo pipework systems, but can also be used for any other types of air or water pipework where a 25mm ID take-off is required. They are not suitable for any sort of oil or fuel use - see Samco Fuel And Oil Resistant Hoses.
All Samco Silicone T-Pieces are 102mm long and wall size varies depending on the internal diameter of hose supplied. Take-off spout is 25mm ID, 25mm long.
Our products are developed
and intended for off-road racing.
They may not be legal for use on public highways where pollution
control laws apply.
Due to the nature of the use of these products, no warranty
is implied or given.
