MANIFOLD - BRAND NEW - STAINLESS
TURBO T3/T4 T04E SUPER 5 BOLT .50 .63 WITH 2 YR
WARRANTY
INTERCOOLER 24 X 12 X 76MM
WASTEGATE 38MM
SUPER 3" BRAIDED DOWNPIPE
BLOW OFF VALVE
DOWNPIPE EXTENSION
FLANGES
GASKETS
FLANGE FOR BOV
FLANGE KIT FOR WASTEGATE
MANIFOLD DETAILS
This manifold was custom-made to be used with
a 35mm external wastegate
and this manifold and down-pipe allows you to
retain A/C and power steering.
This manifold and downpipe is for T3 and T3/T4
Turbos.
The manifold and down-pipe are both made out
of SUS304 Hi-Grade Stainless to help disperse
heat.
This manifold is drag-race quality, and similarly
design manifolds can be found on professional
drag cars.
Manifold has flange for an external wastegate.
And since this manifold is tubular steel,
it flows better than cheap cast iron and is less
prone to cracking.
Down-pipe allows you to retain your A/C and power
steering.
There is a flange for the end of the down-pipe
will bolt-on to your
catalytic converter so you do no have to cut and
weld your exhaust to make this down-pipe fit.
Down-pipe also has a bung for the O2 sensor.
T3/T4 TURBO DETAILS
3" INLET DIAMETER
2" OUTLET
WET FLOATING BEARINGS
1/8 NPT OIL INLET
T3 / T4 FOOTPRINT OK !!
SPECS:
.50 A/R / .63 HOT SIDE
STAGE III WHEEL
BALANCED AND BLUEPRINTED AND COMPRESSION TESTED
Our products are developed
and intended for off-road racing.
They may not be legal for use on public highways where pollution
control laws apply.
Due to the nature of the use of these products, no warranty
is implied or given.