(1) SET Stainless LS1 Engine Swap Headers(pair)
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6
Jeep CJ7 with LSX swap. 4.8,5.3,5.7,6.0
***Works well with cars that have a center cross-member under the engine***
1 5/8 Primary Tubes
2 1/2 Collector
hardware and gaskets as shown
3/8 Thick Header Flange
7/16" Thick Cylinder Head, Turbo, and Wastegate Flanges
Professionally Tigged Welds
Includes Header Gaskets
Angled spark plug boots recommended for clearance
1967-1969 Camaro with factory air or p/s NEEDS minor mods.
Mid length headers may need adjustments to fit all 62-67 Nova applications…stock steering, rack/pinion and aftermarket bolt on clips!
Our products are developed
and intended for off-road racing.
They may not be legal for use on public highways where pollution
control laws apply.
Due to the nature of the use of these products, no warranty
is implied or given.