XS-POWER 90 Degree O2 Oxygen Sensor Extender Spacer M18x1.5

90° O2 Sensor Extender M18x1.5 | Oxygen Sensor Spacer | XS-POWER BRAND NEW UNIVERSAL ANGLED O2 EXHAUST CEL ADAPTER EXTENSION SPACER BUNG - Turbo Manifolds - Toyota

XS-POWER

$14.99 - $21.00
(No reviews yet) Write a Review
SKU:
90° O2 Sensor Extender M18x1.5 | Oxygen Sensor Spacer | XS-POWER
Condition:
New
Adding to cart… The item has been added

 XS-POWER 90° O2 Oxygen Sensor Extender / Spacer – M18x1.5

Premium High-Polish • 90-Degree Design • Universal M18x1.5 Thread • Race / Off-Road Use

The XS-POWER 90 Degree O2 Oxygen Sensor Extender is a compact, high-polish exhaust accessory designed for off-road, racing and experimental exhaust applications using the common M18x1.5 oxygen sensor thread.

Its 90-degree configuration provides an angled mounting solution for compatible O2 sensor locations where component positioning and available clearance are important. The extender installs directly into a compatible M18x1.5 oxygen sensor bung with no welding or permanent modification required for properly matched applications.

⭐ PRODUCT FEATURES

  • 90-degree angled O2 sensor extender design
  • Universal M18x1.5 thread size
  • Designed for compatible 18mm oxygen sensor applications
  • High-polish finish for a premium appearance
  • Compact approximately 75mm x 50mm overall dimensions
  • Direct threaded installation on compatible applications
  • No welding required for properly matched O2 sensor bungs
  • Useful for custom, performance, racing and experimental exhaust configurations
  • Brand new and never used
  • One (1) extender included

SPECIFICATIONS

Product Type O2 / Oxygen Sensor Extender
Angle 90 Degree
Thread Size M18x1.5
Approx. Size 75mm x 50mm
Finish High Polish
Quantity 1 Piece
Application Universal M18x1.5 Compatible Applications

 PERFORMANCE / CUSTOM EXHAUST APPLICATIONS

Designed for use with compatible custom exhaust systems, race exhausts, high-flow exhaust configurations, downpipes, straight-pipe configurations and other off-road or experimental exhaust applications.

Because oxygen sensor placement, available clearance and exhaust configurations vary significantly between vehicles, always verify the M18x1.5 thread size, sensor clearance and installation dimensions before ordering.

WHAT'S INCLUDED

  • (1) XS-POWER 90° O2 Oxygen Sensor Extender / Spacer

Installation instructions are NOT included.

⚠️ IMPORTANT OFF-ROAD / RACING NOTICE

THIS PRODUCT IS DESIGNED FOR OFF-ROAD, RACING OR EXPERIMENTAL VEHICLE USE ONLY. IT IS NOT INTENDED OR OFFERED FOR USE TO DEFEAT, BYPASS, DISABLE OR INTERFERE WITH REQUIRED VEHICLE EMISSIONS-CONTROL EQUIPMENT OR MONITORING ON HIGHWAY VEHICLES.

Buyer is responsible for determining whether installation and use are permitted under applicable federal, state, provincial and local laws and regulations.

XS-POWER PERFORMANCE

XS-POWER supplies turbocharger, intake and performance exhaust components for enthusiasts, builders and racing applications worldwide.

Global Shipping Available

#XSPower #O2Sensor #RaceExhaust #ExhaustFabrication

 

  • 90 DEGREE O2 SENSOR EXTENDER
    ONE EXTENDER
    BRAND NEW, NEVER USED

    UNIVERSAL FOR ANY THREAD SIZE OF 18MM
    STRAIGHT BOLT-ON, NO MODIFICATION NEEDED
    A MUST NEED FOR ANY OFF ROAD VEHICLE RUNNING A HIGH FLOW CAT, SPORT EXHAUST, DOWN PIPE OR A STRAIGHT PIPE
    HIGH POLISH!!!
    MEASURES APPROXIMATELY 75MM X 50MM
    VERY EASY TO INSTALL

     

    ****NO INSTRUCTIONS ARE PROVIDED****

    O2 SENSOR EXTENDER IS DESIGNED FOR OFF-ROAD, RACE OR EXPERIMENTAL VEHICLES ONLY, AND MAY NOT BE USED ON HIGHWAY VEHICLES

 

90 degree O2 sensor extender, O2 sensor spacer, oxygen sensor extender, M18x1.5 O2 spacer, 18mm O2 sensor adapter, 90 degree oxygen sensor adapter, O2 bung extender, race exhaust O2 adapter, downpipe O2 sensor extender, M18 1.5 oxygen sensor spacer, XS-POWER O2 spacer
!