Audi B5 S4 A6 Allroad 2.7T 3" to 2.5" Stainless High Flow Downpipes – XS-POWER / SSAC

XS-POWER / SSAC PRESENTS: AUDI 2.7T HIGH-FLOW PERFORMANCE DOWNPIPES 

3" TO 2.5" • STAINLESS STEEL • HIGH FLOW • K03 / K04 • AUDI 2.7T TWIN TURBO

 WELCOME TO THE NO AUDI TAX ZONE

THE NO OVERPAY ZONE.
THE "WHY AM I PAYING $1,000+ FOR EXHAUST PIPES?" ZONE.
THE "IT'S STAINLESS STEEL PIPE — GET REAL" ZONE.

XS-POWER and SSAC have been supplying Audi turbo enthusiasts with performance exhaust hardware for years. Our philosophy is simple: build serious performance parts and sell them at a price that makes sense.

You shouldn't have to spend four figures just to free up the exhaust side of your Audi 2.7T.

These XS-POWER / SSAC Audi 2.7T 3-inch to 2.5-inch high-flow downpipes are designed for enthusiasts looking to reduce exhaust restriction on compatible Audi B5 S4, C5 A6 and C5 Allroad 2.7T twin-turbo applications.

The legendary Audi 2.7T / 2.7L BiTurbo V6 responds extremely well to exhaust-side modifications. The factory exhaust system was designed around OEM requirements for sound, emissions, packaging and comfort. Performance enthusiasts often want something very different: FLOW.

These performance downpipes use a large 3-inch upper section transitioning to a 2.5-inch exhaust connection, providing a high-flow path for exhaust gases leaving the turbochargers.

Reducing unnecessary post-turbine restriction can support:

• Improved exhaust flow
• Reduced exhaust backpressure
• Quicker turbo response
• Improved throttle response
• Support for modified K03 and K04 turbo setups
• A more aggressive 2.7T exhaust note
• Improved breathing for tuned performance applications

3" TO 2.5" HIGH-FLOW DESIGN

Pipe diameter matters on a turbocharged exhaust system. These downpipes begin with a large 3-inch / approximately 76MM section to provide additional exhaust volume immediately downstream of the turbocharger.

The system then transitions to approximately 2.5 inches / 63.5MM for compatibility with the intended downstream exhaust configuration.

This combination gives Audi 2.7T enthusiasts the large-volume flow characteristics they want near the turbo while maintaining a practical connection to a compatible exhaust system.

 BUILT FOR K03 & K04 AUDI 2.7T PERFORMANCE

Whether you're maintaining a modified K03 2.7T or building a K04-equipped Audi S4 2.7T, improving the exhaust path after the turbochargers is an important part of a properly planned performance combination.

These XS-POWER / SSAC downpipes are designed around compatible Audi 2.7T K03 and K04 turbo applications.

That makes them an excellent consideration for enthusiasts searching for:

• Audi S4 B5 K03 downpipes
• Audi S4 B5 K04 downpipes
• Audi 2.7T 3 inch downpipes
• B5 S4 performance downpipes
• Audi A6 C5 2.7T downpipes
• Audi Allroad 2.7T downpipes
• 2.7T twin turbo exhaust upgrades
• Audi 2.7 BiTurbo performance exhaust
• 3" to 2.5" Audi downpipes
• Stainless steel B5 S4 downpipes

AND YES — THEY SOUND AWESOME

One of the best parts of opening up an Audi 2.7T exhaust system is hearing more of what made this engine famous.

Expect a more aggressive performance character with deeper exhaust tone, more noticeable turbo spool and considerably more 2.7T personality, depending on the remainder of your exhaust system.

Search YouTube for modified B5 S4 2.7T K03 and K04 exhaust systems and you'll understand why these cars continue to have such a dedicated enthusiast following.

STAINLESS STEEL PERFORMANCE CONSTRUCTION

• High-flow 3" to 2.5" configuration
• Stainless steel construction
• Smooth mandrel-bent exhaust routing
• Designed for high-flow turbo exhaust applications
• Performance-oriented replacement for restrictive OEM-style piping
• Designed for compatible K03 / K04 turbo configurations
• Dual downpipe configuration for the Audi 2.7T BiTurbo V6

AUDI 2.7T APPLICATIONS

Designed for compatible Audi 2.7L V6 30V Twin Turbo / BiTurbo applications including:

• Audi B5 S4 2.7T Twin Turbo
• Audi C5 A6 2.7T Quattro Twin Turbo
• Audi C5 Allroad 2.7T Quattro Twin Turbo
• Compatible K03 turbo applications
• Compatible K04 turbo applications

⚠️ IMPORTANT FITMENT NOTICE: Audi used different transmission, turbocharger and exhaust configurations across the B5 S4, C5 A6 and C5 Allroad. A6 / Allroad applications may require modification to the downstream/midpipe section depending on the vehicle configuration. Please verify transmission type, turbo configuration, model year and existing exhaust layout before ordering.

⚙️ TECHNICAL SPECIFICATIONS

 PERFORMANCE WITHOUT THE "AUDI TAX"

Let's make this simple.

Stainless steel is stainless steel.
A bend is a bend.
A weld is a weld.
Flow is flow.

We're enthusiasts too, and we don't believe a performance part suddenly needs an outrageous price tag just because it bolts onto an Audi.

XS-POWER / SSAC = SERIOUS PERFORMANCE WITHOUT THE RIDICULOUS MARKUP.

Spend the money you save on something else your B5 actually needs. Turbos. Fuel. Tuning. Intercoolers. Tires. Or maybe just more boost.

❓ AUDI 2.7T DOWNPIPE FAQ

Will these downpipes fit the Audi B5 S4 2.7T?

They are designed for compatible Audi B5 S4 2.7T Twin Turbo applications. Always verify the vehicle's transmission, turbocharger and exhaust configuration before ordering.

Are these 3-inch Audi S4 downpipes?

The high-flow upper section is approximately 3 inches / 76MM and transitions to approximately 2.5 inches downstream.

Will these work with K03 turbos?

They are designed for compatible Audi 2.7T K03 turbo applications. Verify the specific turbo outlet configuration before purchase.

Will these work with K04 turbos?

They are also intended for compatible K04-equipped Audi 2.7T performance applications.

Will these fit an Audi A6 C5 2.7T?

They can be used with compatible C5 A6 2.7T applications, but differences in transmission and downstream exhaust configuration mean that modification may be necessary. Verify your specific vehicle before ordering.

Will these fit an Audi Allroad 2.7T?

Compatible Allroad 2.7T applications exist, but Allroad fitment can vary by model year, turbo configuration, transmission and downstream exhaust arrangement. Modification may be required.

Why install larger downpipes on a turbocharged Audi?

Larger, smoother-flowing exhaust piping after the turbochargers can reduce exhaust restriction and support the airflow requirements of tuned and upgraded turbo systems.

XS-POWER / SSAC – AUDI TURBO PERFORMANCE

For years, XS-POWER and SSAC have supplied performance-minded Audi enthusiasts with turbochargers, downpipes, turbo manifolds, intercoolers, exhaust systems, turbo inlet pipes, silicone hoses and 2.7T performance hardware.

GLOBAL SHIPPING AVAILABLE

#XSPower   #SSAutochrome   #Audi27T   #B5S4

XS-POWER / SSAC PRESENTS

Audi 2.7T Down-pipes 3" to 2.5" High Flow Stainless – B5 S4 / A6 / Allroad

THE NO AUDI TAX ZONE

THE NO OVERPAY ZONE
THE "GO AWAY YOU OVERCHARGE FOR 4 PIPES" ZONE
THE "HOW CAN YOU CHARGE $1000 FOR 4 PIPES – GET REAL" ZONE
THE SERIOUS "GET A CLUE – IT’S JUST STAINLESS STEEL" ZONE

SSAC & XS-POWER proudly bring you what you actually need: REAL PERFORMANCE DOWNPIPES WITHOUT THE RIDICULOUS MARKUP

Same concept.
Same material.
Same performance gains.
We’re just not playing the markup game.

WHAT YOU GET:

• • 3" to 2.5" high-flow design
• • Smooth mandrel bends for maximum exhaust flow
• • Stainless steel construction
• • Direct upgrade over restrictive OEM pipes

PERFORMANCE:

• • Faster turbo spool
• • Increased horsepower
• • Reduced backpressure
• • Better throttle response

SOUND:

SOUNDS AWESOME
Deep tone, aggressive turbo spool, real boost sound

Check YouTube — tons of real builds running these pipes

FITMENT:

Audi B5 S4 2.7T
Audi A6 2.7T
Audi Allroad 2.7T

MORE PERFORMANCE PARTS:

XS-POWER.COM – Performance Parts

SSAUTOCHROMEINC.COM – Global Parts Distribution

BUILD SMART – BOOST HARD – DON’T OVERPAY

#B5S4 #AudiS4 #2_7T #Downpipes #TurboBuild #BoostLife #XSPOWER #SSAC #Quattro #PerformanceParts