XS-POWER | BMW N54 TD04-19T Forged Billet Twin Turbochargers
BMW N54 TD04-19T FORGED BILLET TWIN TURBOCHARGERS
UPGRADED 11-BLADE COMPRESSOR | 9-BLADE INCONEL TURBINE
BMW 335i / 335is / 335xi / xDrive | N54 3.0L Twin Turbo
TAKE YOUR N54 BUILD TO THE NEXT LEVEL
Unleash the performance potential of your BMW N54 with XS-POWER upgraded TD04-19T forged billet twin turbochargers. Built for enthusiasts seeking greater airflow, upgraded turbocharger components, and serious tuning potential, these performance turbochargers offer an alternative to the limitations of the original factory twin-turbo system.
Featuring 46/58 mm extended-tip forged billet compressor wheels, upgraded TD04L 9-blade Inconel turbine wheels, reinforced wastegate hardware, and enhanced thrust assemblies, this configuration is designed for demanding BMW N54 performance applications.
Engineered for performance builds. Built with upgraded components. Precision balanced for high-speed operation.
PERFORMANCE HIGHLIGHTS
11-blade forged billet extended-tip compressor wheel for upgraded airflow capability.
TD04L turbine wheel with 41.2/47.2 mm dimensions.
Thicker actuator rods, billet end links, and upgraded billet pivot assemblies.
Multi-stage balancing process including high-speed VSR balancing.
FORGED BILLET 11-BLADE COMPRESSOR TECHNOLOGY
At the heart of these XS-POWER N54 19T turbochargers is an upgraded mixed-flow forged billet compressor wheel incorporating extended-tip technology.
- Compressor wheel design: Mixed-flow forged billet, GTX-style extended tip
- Blade configuration: 11 blades
- Upgraded compressor dimensions: 46/58 mm
- Reference stock compressor dimensions: 35.7/46 mm
- Application: High-performance BMW N54 twin-turbo upgrades
The larger compressor wheel configuration is intended to support increased airflow capability for properly equipped and calibrated N54 engines. Actual boost response and airflow depend on the complete turbocharger and engine setup.
UPGRADED TD04L 9-BLADE INCONEL TURBINE WHEELS
These upgraded turbochargers feature TD04L 9-blade Inconel turbine wheels designed for performance-oriented exhaust energy management.
- Turbine design: TD04L Ultra Flow
- Material: Inconel
- Blade count: 9
- Upgraded turbine dimensions: 41.2/47.2 mm
- Reference stock turbine dimensions: 35/40 mm
The upgraded turbine wheel configuration provides increased wheel dimensions compared with the stated factory reference sizes. The supplier specification also describes approximately 30% greater blade surface area compared with its referenced conventional 11- and 12-blade wheel designs.
The blade-area comparison is a product specification, not a verified claim of 30% greater engine power or airflow.
REINFORCED OEM-STYLE WASTEGATE COMPONENTS
Wastegate operation is critical to consistent turbocharger boost management. These XS-POWER upgraded N54 turbochargers incorporate reinforced wastegate components, including:
- OEM-style wastegate actuators
- Updated thicker actuator rods
- Billet actuator end links
- Upgraded billet wastegate pivot arm assemblies
These enhancements are intended to improve component robustness in performance applications. Proper actuator setup, preload adjustment, and boost-control calibration remain essential during installation.
UPGRADED DUAL-OIL-PORT THRUST ASSEMBLY
The turbochargers incorporate an upgraded thrust assembly machined from copper bar stock, with dual oil ports and upgraded thrust collar and spacer components.
- Dual-oil-port thrust assembly
- Machined copper-based thrust component construction
- Upgraded thrust collar and spacer
- 14 mm upgraded collar/spacer specification versus 10 mm reference design
These components form part of the upgraded bearing and thrust support configuration for the turbocharger rotating assembly.
PRECISION COMPONENT, DYNAMIC AND VSR BALANCING
Rotating assembly balance is an important part of turbocharger manufacturing quality. XS-POWER specifies a multi-stage balancing process for these upgraded TD04-19T turbochargers:
- Individual component balancing
- Dynamic rotating assembly balancing
- VSR high-speed balancing using specialized balancing equipment
The stated balancing target is an average residual imbalance of 0.5 mg or less. Individual balancing records and measurements should be consulted where required.
BMW N54 PERFORMANCE POTENTIAL
The XS-POWER TD04-19T billet twin turbocharger configuration is advertised with airflow potential for builds targeting up to approximately 775 HP, subject to the complete vehicle configuration.
Final performance depends on engine condition, boost pressure, fuel type, fueling system, intercooling, exhaust restrictions, tuning, and other supporting modifications.
The 775 HP figure is a stated application potential, not a guaranteed crankshaft or wheel horsepower output. No dyno-verified power figure is provided with this listing. Professional custom tuning is required.
TECHNICAL SPECIFICATIONS
| Brand | XS-POWER |
| Turbo Model | TD04-19T |
| Engine | BMW N54 3.0L Inline-6 |
| Configuration | Twin Turbocharger |
| Compressor Material | Forged Billet |
| Compressor Wheel | 11-Blade Mixed Flow Extended Tip |
| Compressor Dimensions | 46/58 mm |
| Turbine Wheel | TD04L 9-Blade Inconel |
| Turbine Dimensions | 41.2/47.2 mm |
| Wastegate Components | Reinforced Rods / Billet Links / Billet Pivots |
| Thrust Assembly | Upgraded Dual Oil Port |
| Thrust Collar / Spacer | 14 mm vs 10 mm Reference |
| Balancing | Component / Dynamic / VSR High Speed |
| Advertised Power Potential | Up to 775 HP* |
| ECU Calibration | Custom Tune Required |
BMW N54 VEHICLE FITMENT GUIDE
| Year | Model | Engine |
|---|---|---|
| 2007-2010 | BMW 335i | N54 3.0L |
| 2009-2010 | BMW 335i xDrive | N54 3.0L |
| 2011 | BMW 335i xDrive | Verify N54 engine |
| 2011-2013 | BMW 335is | N54 3.0L |
Critical fitment requirement: This listing is for BMW N54 engine applications. Some BMW 335i and 335i xDrive model years use the N55 engine, which is not covered by this listing. Verify the engine code, original turbocharger arrangement, vehicle production date, and mounting configuration before purchase.
Additional BMW N54 vehicles may share related turbocharger applications, but compatibility with models not listed above must be confirmed separately.
TURBOCHARGER REFERENCE PART NUMBERS
The following part numbers are supplied as turbocharger identification and cross-reference information. These upgraded TD04-19T units are not represented as identical to every original equipment turbocharger bearing these numbers.
Turbocharger Reference Numbers
49131-07000, 49131-07001, 49131-07006, 49131-07007, 49131-07010, 49131-07011, 49131-07015, 49131-07016, 49131-07107, 49131-07018, 49131-07019, 49131-07030, 49131-07031, 49131-07040, 49131-07041, 49131-07065, 49131-07066, 49131-07067, 49131-07068, 49131-07069, 49131-07075, 49131-07076, 49131-07077, 49131-07078, 49131-07079, 49131-07161, 49131-07170, 49131-07180, 49131-07205, 49131-07206
BMW OEM Reference Numbers
11654564711, 11654564710, 11657563685, 11657563686, 11657583863, 11657583864, 11657593015, 11657593016, 11657649289, 11657649290, 4564710, 4564711, 7583863, 7583864, 7593015, 7593016, 7563685, 7563686, 7649289, 7649290
Reference numbers are for identification only. Confirm exact compatibility before ordering. BMW and other manufacturer names are used solely to describe vehicle applications.
TUNING AND SUPPORTING MODIFICATIONS
Do not operate upgraded TD04-19T turbochargers under high load using an unverified factory calibration. Appropriate tuning and boost-control setup are necessary for the specific vehicle and supporting hardware.
For high-output BMW N54 builds, evaluate the following systems:
- High-pressure and low-pressure fuel supply
- Fuel injectors and ignition system
- Intercooler and charge-air cooling
- Turbocharger inlet and outlet piping
- Downpipe and exhaust configuration
- Engine management and boost-control calibration
- Oil feed, oil drain, and coolant connections
- Engine compression, maintenance, and overall mechanical condition
PACKAGE CONTENTS
XS-POWER BMW N54 TD04-19T upgraded twin turbocharger set, featuring the compressor, turbine, wastegate, thrust, and balancing specifications described above.
Confirm whether gaskets, mounting hardware, oil lines, coolant lines, installation fittings, and other accessories are included in the selected product package before ordering. These accessories should not be assumed included unless specifically identified.
INSTALLATION AND IMPORTANT NOTICES
- Professional turbocharger installation is strongly recommended.
- Prime and lubricate turbochargers according to appropriate installation procedures before initial startup.
- Inspect oil and coolant lines, drains, vacuum connections, and boost-control components.
- Verify wastegate preload, boost-control operation, and all required clearances.
- Confirm all turbocharger connections and supporting components are suitable for the upgraded configuration.
- Custom tuning is required.
FOR OFF-ROAD / COMPETITION USE WHERE PERMITTED. Confirm emissions and road-use requirements applicable to your location. Installation of performance turbochargers does not establish emissions compliance.
XS-POWER BMW N54 PERFORMANCE
Forged Billet Turbochargers | TD04-19T Upgrades | BMW 335i Performance Parts
Performance-focused turbocharger technology for serious BMW N54 enthusiasts.
XS-POWER.COM | WORLDWIDE SHIPPING OPTIONS
*Advertised flow/power potential depends on vehicle configuration, supporting modifications, fuel, tuning, and engine condition. No specific horsepower output is guaranteed.
-
These are Brand New N54 Turbochargers with an Upgraded Forged Billet Compressor Wheel
Comparable in flow to a 19T Turbo up to 775HP (stock HP is only 450hp)High MIXED-Flow Forged Billet 11 Blade Ultra Flow GTX style Billet Compressor Wheel With Extended Tip Technology
(11 blades, 46/58 mm) (stock size:35.7/46)THESE ARE UPGRADED TD04L Turbine Wheel Available (9 blades , 41.2*47.2) (stock size:35/40)
TD04L9 Blade Ultra Flow Inconel Turbine Wheel (30% More Blade Surface Area Than The 11 & 12 Blade Wheel)Oem Wastegate Actuators with Updated Thicker Rod, Billet End Link & Upgraded Billet Wastegate Pivot Arm Assembly
Upgraded Dual Oil Port Thrust Assembly Machined From Copper Bar
Upgraded Thrust Collar & Spacer (14mm vs 10mm)Component Balanced, Dynamic Balanced Than VSR HIGH SPEED Balanced Using a State Of The Art Balancing Machine, Avg 0.5mg Or Less
Turbo Response is Absolutely Amazing.
Tune Required!
Turbo Model: TD04-19T
Turbo part number:
49131-07000, 49131-07001, 49131-07006, 49131-07007, 49131-07010,
49131-07011, 49131-07015, 49131-07016, 49131-07107, 49131-07018,
49131-07019, 49131-07030, 49131-07031, 49131-07040
49131-07041, 49131-07065, 49131-07066, 49131-07067, 49131-07068,
49131-07069, 49131-07075, 49131-07076, 49131-07077, 49131-07078,
49131-07079, 49131-07161, 49131-07170, 49131-07180, 49131-07205,
49131-07206Turbo OEM Number:
11654564711, 11654564710, 11657563685, 11657563686, 11657583863,11657583864, 11657593015, 11657593016, 11657649289, 11657649290
4564710, 4564711, 7583863, 7583864, 7593015, 7593016, 7563685, 7563686,
7649289, 7649290
Application:
2007 - 2010 BMW 335 335i Models
2009 - 2010 BMW 335 335i xDrive Models
2011 - 2013 BMW 335 335is Models
2007 - 2010 BMW 335i Models
2009 - 2010 BMW 335i xDrive Models
2011 BMW 335i xDrive Models
2011 - 2013 BMW 335is Models
#BMWN54Important:
As there are two types for N54B30 Engine , This link is for BMW 335i/is/x/ix (LHD)