DUAL 3" TO SINGLE 3.5" ALUMINUM Y PIPE
XS-POWER aluminum Y-pipe designed to merge two 3-inch O.D. pipes into one 3.5-inch O.D. outlet for custom twin-turbo, intercooler, charge-pipe and dual air-intake fabrication.
XS-POWER 3" + 3" TO 3.5" ALUMINUM Y MERGE PIPE
Build your custom forced-induction or air-intake system around the XS-POWER Dual 3-Inch to Single 3.5-Inch Aluminum Y Pipe.
This universal fabrication component combines two 3-inch O.D. pipe connections into a single 3.5-inch O.D. connection, providing a compact merge section for applications where two air paths need to transition into one larger pipe.
The Y-pipe is especially useful for twin-turbo intercooler systems, FMIC piping, charge-air systems, dual air intakes and custom intake fabrication.
Aluminum construction keeps the component suitable for custom intake and charge-pipe fabrication, while the formed and welded Y configuration eliminates the need to fabricate the entire merge section from individual tubing.
Each pipe end is rolled to provide a defined connection edge for compatible silicone couplers and clamps.
PERFORMANCE FABRICATION FEATURES
Two 3-inch O.D. connections provide the dual side of the Y-pipe for compatible twin-pipe or dual-intake configurations.
Both branches merge into one 3.5-inch O.D. connection for integration with compatible larger-diameter piping.
Designed for custom air-intake, intercooler and charge-pipe fabrication applications.
Preconfigured merge section reduces the amount of individual tubing needed to create a dual-to-single transition.
Each end features a rolled connection edge for use with appropriately sized silicone couplers and clamps.
Suitable for builders creating custom turbocharger, intercooler and intake piping layouts.
TWIN TURBO AND INTERCOOLER APPLICATIONS
The XS-POWER aluminum Y merge pipe can be incorporated into compatible custom piping systems including:
- Twin-turbo intercooler piping
- Twin-turbo charge-air systems
- Front-mount intercooler (FMIC) piping
- Dual air-intake systems
- Dual filter intake systems
- Turbocharger compressor inlet fabrication
- Turbocharger compressor outlet fabrication
- Cold-air intake fabrication
- Custom charge-pipe systems
- Custom performance air-routing systems
Final suitability depends on pipe routing, airflow direction, coupler dimensions, available space and the design of the individual vehicle or fabrication project.
TECHNICAL SPECIFICATIONS
| Brand | XS-POWER |
| Product Type | Aluminum Y Merge Pipe |
| Configuration | Dual to Single |
| Dual Connections | 2 x 3.0" O.D. |
| Single Connection | 1 x 3.5" O.D. |
| Material | Aluminum |
| Construction | Formed / Welded Aluminum |
| Pipe Ends | Rolled |
| Application | Turbo / Intercooler / Intake Fabrication |
| Fitment | Universal / Custom |
| Quantity | 1 Y Pipe |
| Condition | Brand New |
Dimensions refer to the stated outside diameter (O.D.) of the pipe connections.
IMPORTANT UNIVERSAL FITMENT INFORMATION
This is a universal fabrication component, not a vehicle-specific bolt-on replacement.
Measure your existing piping and confirm that your project requires two 3-inch O.D. connections merging into one 3.5-inch O.D. connection before ordering.
Installation may require silicone couplers, clamps, additional aluminum tubing, cutting, welding, brackets or other fabrication depending on the application.
Professional fabrication is recommended when incorporating the Y-pipe into a pressurized turbocharger or intercooler system.
PACKAGE CONTENTS
1 x XS-POWER Aluminum Y Pipe
Configuration: Dual 3" O.D. to Single 3.5" O.D.
Silicone couplers, clamps and additional piping are not stated as included and should be selected according to the individual build.
FREQUENTLY ASKED QUESTIONS
What size are the connections?
Two connections are 3 inches O.D. and merge into one 3.5-inch O.D. connection.
Is this designed for twin-turbo applications?
Yes. Twin-turbo charge-air and intercooler piping are among the intended custom fabrication applications for this Y-pipe.
Can I use it for a dual air intake?
Yes. It can be incorporated into a compatible custom dual air-intake system where two 3-inch pipes need to merge into one 3.5-inch pipe.
Can this be used for FMIC piping?
Yes, where the intercooler or charge-pipe layout requires the stated dual 3-inch to single 3.5-inch configuration.
Are the pipe ends rolled?
Yes. The stated product specification identifies rolled ends.
Is this a direct-fit vehicle-specific part?
No. This is a universal custom-fabrication component.
Does the kit include silicone couplers and clamps?
The supplied information specifies one Y-pipe only. Couplers and clamps are not stated as included.
DUAL 3" TO 3.5" ALUMINUM Y PIPE FOR TWIN TURBO AND INTERCOOLER FABRICATION
The XS-POWER aluminum Y-pipe is designed for performance builders searching for a dual 3 inch to 3.5 inch Y pipe, twin turbo Y pipe, aluminum intercooler Y pipe, FMIC merge pipe, dual air intake Y pipe, turbo charge pipe merge, dual intake merge pipe or custom aluminum intercooler piping component.
Its dual-to-single configuration makes it useful for custom forced-induction systems where two 3-inch air paths must transition into one 3.5-inch pipe.
Applications can include twin-turbo systems, front-mount intercooler piping, dual air-intake systems, turbo inlet fabrication, turbo outlet fabrication and other custom charge-air projects.
XS-POWER supplies turbocharger, intercooler, intake and exhaust fabrication components for performance projects in the United States and supported international markets.
XS-POWER performance and fabrication components are available to customers throughout the United States and supported international destinations.
Turbochargers, turbo kits, manifolds, headers, downpipes, exhaust components, intercooler piping, intake piping and turbo fabrication components for performance applications.
XS-POWER ALUMINUM Y MERGE PIPE
The XS-POWER Dual 3-Inch to Single 3.5-Inch Aluminum Y Pipe is part of XS-POWER's performance fabrication product line, developed from the ground up through our R&D center in the USA for performance turbocharger, intercooler and air-intake applications.
Designed to combine two 3-inch O.D. air paths into one 3.5-inch O.D. connection, this Y-pipe provides a clean, purpose-built merge section for custom twin-turbo systems, intercooler piping, FMIC systems, charge piping and dual air-intake systems.
The aluminum construction uses a formed, mandrel-bent and welded configuration to create the dual-to-single transition while eliminating the need for the installer to fabricate the complete Y-section from individual pieces of tubing.
Each pipe end is rolled, providing a defined connection edge for appropriately sized silicone couplers and clamps in custom intake and pressurized charge-air systems.
Whether used in a twin-turbo intercooler system, dual air intake, FMIC installation or custom forced-induction build, this XS-POWER Y-pipe provides a ready-made foundation for merging dual 3-inch piping into a single 3.5-inch air path.
-
Aluminum Y Pipe For Air Intake or Intercooler Piping
Two 3" Pipes Merge to Single 3.5"
Dual Air Intake System
Twin Turbo Intercooler Piping
One Y Pipe
This is XS-Power's Newest Products for the Application Stated Above. All Parts Are Developed from Ground Up in Our R&D Center in USA, Designed and Built for Improved Performance Gains, with Excellent Fitment and Easy Installation.
Mandrel Bent /Welded Aluminum Y Pipe, Each End is Rolled
Developed from the ground up through the XS-POWER R&D center in the USA as part of our performance turbocharger, intercooler and intake fabrication product line.
