Turbo Hybrid K04-022R 340hp 1.8T Audi S3 TT Cupra R XLC

XS-POWER

$359.00 - $399.00
(No reviews yet) Write a Review
SKU:
XS-POWER | K04-022R XLC 340 Hybrid Turbo Audi S3, TT 225 & SEAT Leon Cupra R
Condition:
New
Availability:
In stock - typically ships within 1 business day; tracking in 24-48 hours.
Turbo Model:
K04-022R XLC 340
Engine:
1.8T 20V
CHRA:
RS6-Style Hybrid
Fitment:
Audi S3 8L / TT 8N / Leon Cupra R
Adding to cart… The item has been added
XS-POWER PERFORMANCE TURBOCHARGERS

K04-022R XLC 340 HYBRID TURBOCHARGER

AUDI S3 8L | AUDI TT 8N 225 | SEAT LEON CUPRA R

UP TO 340 CV ADVERTISED PERFORMANCE POTENTIAL*

RS6-STYLE CHRA | ENLARGED COMPRESSOR | VSR HIGH-SPEED BALANCED

NOT YOUR ORDINARY K04 TURBOCHARGER

Take your Volkswagen Group 1.8T 20-valve turbo engine beyond the limitations of a standard K04 configuration with the XS-POWER K04-022R XLC 340 hybrid turbocharger.

Developed for performance-focused Audi S3 8L, Audi TT 8N 225, and SEAT Leon Cupra R applications, this upgraded hybrid turbo combines K04-style installation architecture with enlarged compressor technology and an RS6-style center housing rotating assembly.

The result is a performance-oriented hybrid turbocharger intended for enthusiasts seeking greater airflow capacity while retaining the general mounting arrangement of the original K04 application.

Hybrid K04 engineering. Enlarged rotating assembly. Serious 1.8T tuning potential.

K04-022R XLC HYBRID

Upgraded hybrid turbocharger configuration for selected 1.8T 20V engines.

46.4 / 62.3 MM

Enlarged compressor wheel dimensions for increased airflow potential.

RS6-STYLE CHRA

Upgraded center housing rotating assembly with XLC cast construction.

VSR BALANCED

Component and CHRA balancing with high-speed VSR verification.

ADVANCED K04-022R HYBRID TURBO TECHNOLOGY

The XS-POWER K04-022R XLC 340 is not a conventional stock-size K04 turbocharger. Its hybrid design incorporates upgraded rotating components intended to support higher airflow than the original configuration.

  • Hybrid K04-022R architecture: Designed around the original K04-style turbocharger application.
  • RS6-style CHRA: Upgraded center housing rotating assembly configuration.
  • Enlarged compressor wheel: 46.4 / 62.3 mm dimensions.
  • GTX-style compressor technology: Enlarged and reinforced compressor wheel design.
  • XLC cast CHRA: Performance-oriented cast center housing assembly.
  • VSR high-speed balancing: Component and assembled CHRA balancing.
  • Advertised 340 CV potential: Performance target dependent on vehicle configuration and tuning.

ENLARGED 46.4 / 62.3 MM COMPRESSOR WHEEL

The upgraded compressor wheel is a key feature of the K04-022R XLC hybrid design.

With stated dimensions of 46.4 mm / 62.3 mm, the enlarged compressor configuration is intended to support greater airflow potential than a standard K04-022 turbocharger.

The supplier describes the compressor as an enlarged, reinforced GTX-style design, with a size class approaching certain GT28-style compressor configurations.

This comparison describes the general compressor size concept only. It does not mean that the complete turbocharger has identical flow, spool characteristics, or performance to a specific GT28 model.

RS6-STYLE CENTER HOUSING ROTATING ASSEMBLY

Unlike a conventional K04 replacement, this hybrid configuration incorporates an RS6-style CHRA concept together with the XLC cast center housing specification.

The CHRA is the central rotating assembly of the turbocharger, supporting the shaft and compressor/turbine rotating components.

This upgraded hybrid arrangement is intended for performance applications requiring a different rotating assembly configuration from the original K04 turbocharger.

COMPONENT AND VSR HIGH-SPEED BALANCED

Turbocharger balance is critical to high-speed rotating assembly operation.

XS-POWER specifies component balancing and CHRA balancing, followed by high-speed VSR balancing for the K04-022R XLC hybrid turbocharger.

  • Individual rotating component balancing
  • Assembled CHRA balancing
  • VSR high-speed balancing process
  • Performance-oriented rotating assembly preparation

These processes help control rotating assembly imbalance and form an important part of turbocharger manufacturing quality.

340 CV HYBRID TURBO PERFORMANCE POTENTIAL

The K04-022R XLC 340 is advertised for applications targeting up to approximately 340 CV (metric horsepower), equivalent to approximately 335 mechanical horsepower.

This performance level requires appropriate engine calibration and supporting modifications. Actual output will vary depending on the vehicle, fuel, engine condition, boost pressure, intercooling, exhaust system, and tuning.

PERFORMANCE NOTE

The advertised 340 CV figure is not a guaranteed horsepower result. The supplied product description references bench-measured performance but does not include an independent dyno chart, test conditions, or a verified wheel-horsepower figure.

VEHICLE APPLICATIONS AND FITMENT

Vehicle Platform Engine Original Rating
Audi S3 8L 1.8T 20V 210 / 225 PS
Audi TT 8N 1.8T 20V 225 PS
SEAT Leon Cupra R 1M 1.8T 20V 225 PS
IMPORTANT FITMENT INFORMATION

Designed for the listed K04-equipped 1.8T 20V applications. Verify the original turbocharger identification, engine code, manifold configuration, compressor outlet, turbine outlet, oil and coolant connections, and actuator arrangement before ordering.

Not all Audi TT 1.8T, Audi A3, VW Golf GTI, or SEAT Leon 1.8T variants use the same turbocharger mounting configuration. Compatibility with unlisted K03-equipped or other applications is not established.

TECHNICAL SPECIFICATIONS

Brand XS-POWER
Turbo Model K04-022R XLC 340
Product Type Upgraded Hybrid Turbocharger
Engine Platform 1.8T 20-Valve Turbo
Compressor Design Enlarged Reinforced GTX-Style
Compressor Dimensions 46.4 / 62.3 mm
CHRA Configuration RS6-Style Hybrid
CHRA Housing XLC Cast
Balancing Component / CHRA / VSR High Speed
Advertised Performance Up to 340 CV*
Installation Type K04-Style Application; Verify Connections
Tuning Custom ECU Calibration Required

RECOMMENDED SUPPORTING MODIFICATIONS

To take full advantage of an upgraded K04 hybrid turbocharger, evaluate the complete 1.8T performance system.

  • Custom ECU software and professional engine calibration
  • Appropriate fuel injectors and fuel pump capacity
  • Upgraded intercooler and charge-air cooling
  • Suitable turbo inlet pipe and intake configuration
  • Compatible downpipe and exhaust system
  • Boost control, diverter valve, and vacuum system condition
  • Proper oil supply and coolant connections
  • Engine compression, ignition system, and general mechanical condition

Required upgrades depend on the desired power output and existing vehicle configuration.

INSTALLATION AND TUNING REQUIREMENTS

The K04-022R XLC hybrid is intended for installation in place of the corresponding original K04 application, subject to verification of the vehicle and connection details.

Because this is an enlarged hybrid turbocharger rather than a standard original-equipment replacement, professional installation and custom tuning are strongly recommended.

  • Verify engine code and original turbocharger part number.
  • Inspect oil feed, oil drain, and coolant connections.
  • Confirm intake, compressor outlet, and downpipe clearance.
  • Check actuator setup and boost-control operation.
  • Prime the turbocharger correctly before initial startup.
  • Use appropriate custom ECU calibration before performance operation.

PACKAGE CONTENTS

1 x XS-POWER K04-022R XLC 340 Hybrid Turbocharger.

Confirm the supplied actuator, gaskets, hardware, and any additional fittings before purchase. Accessories are not assumed included unless specifically identified in the product package.

IMPORTANT PRODUCT NOTICE

This is an aftermarket hybrid performance turbocharger, not a standard original-equipment K04 replacement. Modifications, supporting hardware, and custom tuning may be required.

FOR OFF-ROAD / COMPETITION USE WHERE PERMITTED. Verify applicable emissions and road-use regulations before installation.

XS-POWER HYBRID TURBO PERFORMANCE

K04 Hybrid Turbochargers | Audi 1.8T Performance | S3 8L | TT 8N | Leon Cupra R

Performance turbocharger upgrades for enthusiasts and professional builders worldwide.

XS-POWER.COM | WORLDWIDE SHIPPING OPTIONS

*340 CV is the advertised performance potential, not a guaranteed engine or wheel horsepower result. Actual output depends on the complete vehicle setup and tuning.

  • XS-POWER
    THE LEADER IN HYBRID KO4 APPLICATIONS
    Turbo Hybrid 340 K04-022R XLC
    KO4-022 XLC Compatible WITH THESE APPLICATIONS Audi S3 8L 1.8T 210/225 Audi TT 8N 1.8T 225 Seat Leon Cupra R 225 This is not a standard K04.. Turbo hybrid with RS6 CHRA, Enlarged wheels 46.4 / 62.3 (almost a GT28) Enlarged and reinforced compressor wheel TICKET GTX Install in place of the original turbo Power measured on bench with this turbo 340cv
    XLC CAST CHRA
    VSR HIGH SPEED COMPONENT AND CHRA BALANCED.

  • #AUDI
    #KO4
    #S3
    #KO4022
    #AMU
    #225TT
    #AUDITT

     

#AudiS3 #AudiTT #AudiTT225 #K04 #K04022 #K04022R #HybridTurbo #Audi18T #20VTurbo #SeatLeonCupraR #XSPOWER #TurboUpgrade #AMU #BAM #VSRBalanced #PerformanceTurbo

K04-022R XLC, K04 022 hybrid turbo, Audi S3 8L hybrid turbo, Audi TT 225 turbo upgrade, Audi TT 8N K04 turbo, SEAT Leon Cupra R hybrid turbo, K04 340 turbo, K04 022R 340cv, 1.8T 20V hybrid turbocharger, RS6 CHRA K04, 46.4 62.3 turbo, VSR balanced K04, Audi AMU turbo upgrade, Audi BAM turbo upgrade, K04-022 performance turbo, XS-POWER hybrid turbo #AudiS3 #AudiTT #AudiTT225 #K04 #K04022 #K04022R #HybridTurbo #Audi18T #20VTurbo #SeatLeonCupraR #XSPOWER #TurboUpgrade #AMU #BAM #VSRBalanced #PerformanceTurbo