XS-POWER Front Mount Intercooler FMIC & Piping Kit with BOV – 2005-2007 Mazdaspeed6 2.3L Turbo

UPGRADE YOUR MAZDASPEED6 FROM THE FACTORY TOP-MOUNT INTERCOOLER TO A LARGE FRONT-MOUNT INTERCOOLER SYSTEM!

The XS-POWER Mazdaspeed6 Front Mount Intercooler Kit is a complete performance intercooler and piping package designed for the 2005-2007 Mazda Mazdaspeed6 / Mazda 6 MPS 2.3L DISI Turbo. This system relocates the intercooler from the factory top-mount position to the front of the vehicle, placing the intercooler directly in the incoming airflow for improved charge-air cooling.

Built around a large bar-and-plate front mount intercooler, this kit includes 2.5-inch aluminum intercooler piping, reinforced silicone couplers, stainless T-bolt clamps, mounting brackets, hardware and a blow-off valve (BOV). It provides the major components needed for an FMIC conversion in one package.

Whether you are searching for a Mazdaspeed6 intercooler upgrade, Mazda 6 MPS FMIC kit, MS6 intercooler piping kit, 2.3 DISI Turbo intercooler or a complete Mazdaspeed 6 front mount intercooler conversion, this XS-POWER system provides a performance-oriented alternative to the factory top-mount configuration.

 LARGE BAR-AND-PLATE FRONT MOUNT INTERCOOLER

At the center of the system is a substantial bar-and-plate intercooler designed to provide increased cooling capacity for the turbocharged 2.3L application.

• Core Size: 22" x 7" x 2.5"
• Overall Size: Approximately 28" x 7" x 2.5"
• Core Thickness: 2.5"
• Inlet Size: 2.5"
• Outlet Size: 2.5"
• Construction: Bar-and-Plate
• Configuration: Front Mount Intercooler / FMIC

Moving the intercooler to the front of the vehicle exposes the core to direct ambient airflow and eliminates the factory top-mount intercooler location. This configuration is particularly useful on modified turbocharged applications where controlling charge-air temperature becomes increasingly important.

⚡ 2.5-INCH ALUMINUM INTERCOOLER PIPING

The kit includes a matched 2.5-inch aluminum intercooler piping system engineered to connect the turbocharged intake system to the front-mounted intercooler.

• 2.5" diameter aluminum charge piping
• Smooth bends designed for efficient airflow
• Performance-oriented replacement for the factory intercooler routing
• Reinforced silicone couplers included
• Heavy-duty stainless steel T-bolt clamps included
• Designed as part of the complete Mazdaspeed6 FMIC conversion

BLOW-OFF VALVE / BOV INCLUDED

Unlike basic intercooler packages that include only a core and piping, this package also includes a blow-off valve (BOV) as part of the complete system.

The included BOV provides a performance-oriented solution for managing charge pressure when the throttle closes. Vehicle setup, tuning and recirculation requirements should be considered when installing any aftermarket blow-off valve on the Mazdaspeed6 DISI Turbo platform.

HEAVY-DUTY INTERCOOLER MOUNTING SYSTEM

The system includes dedicated aluminum and stainless-steel mounting components to securely position the intercooler at the front of the vehicle. Four stainless-steel brackets support the intercooler and attach to a polished aluminum upper mounting bracket for a clean, professional installation.

• Four stainless-steel intercooler support brackets
• Polished aluminum upper mounting bracket
• Secure front-mount positioning
• Mounting hardware included
• Factory crash bar is retained

PERFORMANCE-ORIENTED FMIC CONVERSION

The Mazdaspeed6's turbocharged 2.3L DISI engine can generate significant intake-air temperatures under boost. An efficient intercooler helps remove heat from the compressed charge air before it enters the engine.

This XS-POWER FMIC system is designed to provide increased intercooler capacity and improved exposure to ambient airflow compared with the factory top-mount location. It is suitable for stock and modified street/performance builds when properly installed and matched to the vehicle's overall setup.

The intercooler system is designed for performance applications up to approximately 400 HP, depending on boost pressure, turbocharger, tuning, ambient conditions and the complete vehicle combination.

 VEHICLE FITMENT

Designed for:

• 2005 Mazda Mazdaspeed6 2.3L Turbo
• 2006 Mazda Mazdaspeed6 2.3L Turbo
• 2007 Mazda Mazdaspeed6 2.3L Turbo
• Mazda 6 MPS 2.3L Turbo – applicable markets/configurations
• 2.3L DISI Turbo engine applications as applicable

International Search Applications: This vehicle may also be searched or marketed as Mazda 6 MPS, Mazda6 MPS, Mazdaspeed 6, Mazdaspeed6, MS6, Mazda 6 Turbo and 2.3 DISI Turbo depending on country and market.

IMPORTANT: Verify vehicle configuration and compatibility before ordering, particularly for non-U.S. market vehicles.

COMPLETE KIT INCLUDES

• 1 x Bar-and-Plate Front Mount Intercooler
• 2.5" Aluminum Intercooler Piping Set
• Blow-Off Valve / BOV
• Reinforced Silicone Couplers / Hoses
• Stainless Steel T-Bolt Clamps
• Aluminum Mounting Bracket
• Stainless Steel Intercooler Support Brackets
• Required Installation Hardware as Shown

⚠️ INSTALLATION INFORMATION – PLEASE READ

This is a performance FMIC conversion and should not be represented as a completely modification-free factory replacement.

• The factory windshield-washer reservoir may require removal or relocation.
• The front bumper and/or lower undertray/guard panel may require trimming for proper clearance.
• The factory crash bar can be retained and does not require modification according to the intended installation configuration.
• Vehicle-to-vehicle differences and previous modifications can affect installation.
• Professional installation is strongly recommended.
• Check all couplers and clamps after initial heat cycles and periodically thereafter.

⭐ WHY CHOOSE THE XS-POWER MAZDASPEED6 FMIC KIT?

• Complete front-mount intercooler conversion package
• Large bar-and-plate intercooler
• 2.5" aluminum charge piping
• 2.5" intercooler inlet and outlet
• BOV included
• Reinforced silicone couplers
• Stainless steel T-bolt clamps
• Dedicated mounting brackets
• Retains the factory crash bar
• Designed specifically around the turbocharged Mazdaspeed6 platform
• Excellent choice for street, performance and modified MS6 builds

GLOBAL SHIPPING AVAILABLE

XS-POWER supplies performance turbocharger, intercooler, exhaust and fabrication components to enthusiasts around the world. International buyers should verify vehicle configuration before ordering because Mazda model names and specifications can vary between markets.

Search Terms: Mazdaspeed6 intercooler, Mazdaspeed 6 intercooler kit, Mazdaspeed6 FMIC, Mazda 6 MPS intercooler, Mazda6 MPS FMIC, MS6 intercooler piping, Mazdaspeed6 front mount intercooler, 2.3 DISI Turbo intercooler, Mazda MPS turbo intercooler, Mazdaspeed6 BOV kit, Mazda 6 turbo intercooler piping, 2005 Mazdaspeed6 intercooler, 2006 Mazdaspeed6 intercooler, 2007 Mazdaspeed6 intercooler.

#XSPower #Mazdaspeed6 #Mazda6MPS #MS6 #FMIC #FrontMountIntercooler #DISITurbo #Mazdaspeed #TurboMazda #IntercoolerKit #TurboPerformance #Boosted

Performance products should be installed by a qualified technician. Horsepower capability is an approximate system rating and is not a guarantee of vehicle horsepower. Actual results depend on the complete vehicle combination, tuning, boost level and operating conditions.