TURBO 3.5 inch to 3 inch O.D. Cast 304 Stainless Steel 90 Degree Reducer Elbow Pipe Tube

The XS-POWER 3.5" to 3" 90-degree reducer elbow is a heavy-duty fabrication component for custom turbocharger, exhaust, manifold and performance piping applications requiring a diameter transition and directional change in one component.

The elbow transitions from 3.5-inch outside diameter to 3-inch outside diameter through a compact 90-degree tight-radius bend.

Manufactured from cast 304 stainless steel with an approximately 3mm / 11-gauge wall, this reducer is intended for fabricators building custom high-temperature exhaust and turbo hot-side systems.

This reducer is manufactured from 304 stainless steel, a commonly used material for performance exhaust and turbo fabrication.

The cast construction allows the reducer and 90-degree bend to be incorporated into one substantial fabrication component for applications where conventional straight reducers and separate elbows would require additional joints.

The reducer features an approximately 3mm thick / 11-gauge wall. This substantial wall thickness makes the component well suited to custom turbo manifold, header and exhaust fabrication where a robust stainless component is desired.

Space is often limited around turbochargers, manifolds, engine accessories, suspension components and custom exhaust routing.

The tight-radius 90-degree configuration allows the piping direction and diameter to change within a compact area, making this reducer particularly useful for custom fabrication where available space is limited.

This is a universal fabrication component rather than a vehicle-specific bolt-on part.

• Custom turbocharger hot-side piping
• Turbo manifold fabrication
• Turbo header fabrication
• Custom exhaust systems
• Downpipe fabrication
• Wastegate and exhaust routing projects
• Race and performance exhaust fabrication
• Space-limited 3.5" to 3" piping transitions

For fabrication projects that require both a 3.5" to 3" diameter reduction and a 90-degree change in direction, this component combines both functions into a single cast stainless steel elbow.

Dimensions are specified by outside diameter (O.D.). The large end is 3.5" O.D. and the reduced end is 3" O.D.. Measure your existing tubing and planned fabrication layout before ordering. This is a universal fabrication part and does not have vehicle-specific bolt-on fitment.

1 x XS-POWER 3.5" to 3" O.D. 90-Degree Cast 304 Stainless Steel Reducer Elbow

The XS-POWER reducer is designed for fabricators searching for a 3.5 to 3 inch stainless reducer, 3.5" to 3" exhaust reducer, 90 degree stainless reducer elbow, turbo reducer pipe, 304 stainless turbo elbow, cast stainless exhaust elbow, tight-radius turbo elbow, 3 inch turbo piping or custom stainless exhaust reducer.

Its combination of cast 304 stainless steel construction, 3.5" to 3" O.D. transition, tight 90-degree bend and approximately 3mm wall thickness makes it a useful fabrication component for custom turbo and performance exhaust projects.