WORK RS Red Aluminum Locking Lug Nuts - M12 x 1.5 - 20-Piece Set
Closed-end RS-style aluminum wheel lug nut set featuring 16 standard lug nuts and 4 locking lug nuts. Designed for compatible M12 x 1.5 wheel stud applications when the wheel seat and installation specifications match.
IMPORTANT: VERIFY WHEEL SEAT AND THREAD FITMENT
M12 x 1.5 thread compatibility alone does not establish safe wheel fitment. Confirm the lug nut seat profile, wheel stud engagement, wheel manufacturer's requirements and correct installation torque before purchasing or installing. The seat profile of this specific set has not been independently confirmed.
QUICK PRODUCT SPECIFICATIONS
WORK RS RED ALUMINUM LUG NUTS FOR COMPATIBLE PERFORMANCE WHEELS
Give your wheel installation a distinctive performance-inspired appearance with the WORK RS red aluminum locking lug nut set. This 20-piece wheel hardware package combines 16 standard RS-style lug nuts and 4 matching locking lug nuts in a coordinated red finish.
Featuring a specified M12 x 1.5 thread pitch and closed-end construction, this set is intended for appropriately matched wheel and stud applications. The aluminum construction and red exterior provide a tuner-style appearance for compatible aftermarket wheel installations.
Customers shopping for red wheel nuts, M12x1.5 tuner lug nuts, RS-style locking wheel hardware or Honda Civic aftermarket wheel accessories should verify the wheel seat geometry before choosing this product. Factory and aftermarket wheels can use different seat profiles even when fitted to the same vehicle.
The set is supplied new in box and contains enough lug nuts for a typical four-wheel, five-lug configuration: five nuts per wheel, including one locking nut at each wheel position. This quantity does not establish compatibility with every five-lug wheel.
PRODUCT FEATURES
Red exterior appearance for a matching aftermarket wheel hardware setup.
Closed-end lug nut design for a finished wheel installation appearance.
Specified 12 mm nominal thread diameter and 1.5 mm thread pitch.
A 20-piece set combining standard and locking wheel lug nuts.
Aluminum lug nut material as specified in the original product information.
New wheel hardware set supplied in its product packaging.
DETAILED TECHNICAL SPECIFICATIONS
| Product Name | WORK RS Aluminum Locking Lug Nut Set |
|---|---|
| Style | RS Type / Closed End |
| Thread Specification | M12 x 1.5 |
| Nominal Thread Diameter | 12 mm |
| Thread Pitch | 1.5 mm |
| Material | Aluminum |
| Color | Red |
| End Design | Closed End |
| Standard Lug Nuts | 16 |
| Locking Lug Nuts | 4 |
| Total Lug Nuts | 20 |
| Wheel Seat Profile | Must be verified before installation |
| Installation Tool | Hand tools only; no impact wrench |
| Condition | Brand New in Box |
M12 X 1.5 LUG NUT VEHICLE APPLICATION GUIDE
The supplied application guide references Honda, Acura, Toyota, Mazda, Mitsubishi, Isuzu and Daihatsu vehicles. These manufacturers have produced vehicles using M12 x 1.5 wheel studs, but thread size and wheel seat design can vary by model, year, trim and wheel configuration.
| Vehicle Make | Fitment Guidance |
|---|---|
| Honda | Verify M12 x 1.5 thread, wheel seat and wheel stud engagement |
| Acura | Verify thread and wheel seat; factory ball-seat wheels may differ |
| Toyota | Confirm wheel seat style; some wheels use washer-style hardware |
| Mazda | Verify vehicle-specific wheel stud and seat requirements |
| Mitsubishi | Verify wheel seat, stud thread and installation requirements |
| Isuzu | Check vehicle and wheel specifications before ordering |
| Daihatsu | Check vehicle and wheel specifications before ordering |
Important: The table identifies potential vehicle-make applications, not guaranteed direct-fit models. A five-lug wheel configuration is generally needed to use all 20 lug nuts in this set. Four-lug wheels require a different quantity.
HONDA CIVIC AND ACURA AFTERMARKET WHEEL APPLICATIONS
Honda Civic and Acura owners frequently search for red M12x1.5 lug nuts when selecting hardware for aftermarket wheels. This WORK RS-style set may be relevant where the wheel studs, wheel seat profile, stud engagement and wheel manufacturer's hardware requirements are compatible.
Do not assume that these aluminum lug nuts will fit factory Honda or Acura wheels solely because the stud thread is M12 x 1.5. Many factory applications use ball-seat lug nuts. Aftermarket wheel seat designs can differ, and the correct lug nut must match the wheel.
Before ordering for a Civic, Integra, RSX or another vehicle, confirm the actual wheel specifications and required number of lug nuts.
PACKAGE CONTENTS - 20-PIECE SET
- 16 x red aluminum standard RS-style lug nuts
- 4 x red aluminum locking RS-style lug nuts
- 1 x product set in box
Locking key/tool inclusion has not been confirmed from the supplied product information. Verify the actual box contents before publishing a claim that a lock key is included.
INSTALLATION INSTRUCTIONS AND SAFETY INFORMATION
DO NOT USE AN IMPACT WRENCH
The supplied WORK RS product instructions specifically prohibit impact wrench use. Install and remove these aluminum lug nuts using the appropriate hand tools and the correct wheel manufacturer's torque procedure.
- Verify the vehicle wheel stud thread is M12 x 1.5.
- Confirm the lug nut seat profile matches the wheel.
- Verify the closed-end nut has sufficient internal depth for the installed studs.
- Check that the lug nut provides adequate thread engagement.
- Start each lug nut carefully by hand to avoid cross-threading.
- Use the correct hand tools and a calibrated torque wrench.
- Follow the wheel and vehicle manufacturers' installation instructions and torque specifications.
- Follow the wheel manufacturer's guidance for checking torque after initial use.
Aluminum lug nuts are not suitable for every wheel or vehicle application. Confirm that the wheel and hardware manufacturers approve this material and design for the intended use.
FREQUENTLY ASKED QUESTIONS
What thread pitch are these WORK RS lug nuts?
The specified thread size is M12 x 1.5, with a 12 mm nominal diameter and 1.5 mm pitch.
How many lug nuts come in the set?
There are 20 lug nuts total: 16 standard lug nuts and 4 locking lug nuts.
Are these open-end or closed-end lug nuts?
They are the specified closed-end RS-style design.
Will these fit my Honda Civic?
They may fit a compatible Civic aftermarket wheel setup with M12 x 1.5 studs and the correct lug nut seat. Check the wheel's seat profile, stud length and lug nut quantity before purchasing.
Will these fit factory Honda or Acura wheels?
Do not assume compatibility. Many factory Honda and Acura wheels use ball-seat lug nuts, and the seat geometry of this specific set must be confirmed.
Can these be used on Toyota or Mazda vehicles?
Some vehicles from these manufacturers use M12 x 1.5 wheel studs, but fitment depends on the exact model and wheel hardware requirements.
Are the lug nuts aluminum or steel?
The supplied product information identifies aluminum construction.
Can I use an impact wrench?
No. The supplied instructions specifically state not to use an impact wrench.
Are these suitable for five-lug wheels?
The 20-piece quantity provides five lug nuts per wheel for four wheels. Actual compatibility still depends on the wheel and vehicle specifications.
Do these fit four-lug wheels?
A four-lug vehicle normally uses 16 lug nuts across four wheels, so this 20-piece set would contain more nuts than required. Thread and seat compatibility must still be verified.
Is a locking lug nut key included?
The supplied description confirms four locking nuts but does not specify the included removal tool. Confirm the current package contents before ordering.
RED M12X1.5 LOCKING LUG NUTS FOR AFTERMARKET WHEEL SETUPS
Customers comparing WORK RS red aluminum lug nuts, M12x1.5 locking lug nuts, 20-piece red wheel nut sets, Honda Civic aftermarket wheel lug nuts or closed-end tuner lug nuts should verify the wheel seat design and wheel stud specifications before choosing this set.
The WORK RS-style closed-end design, aluminum construction, red finish and combination of standard and locking lug nuts make this product relevant to compatible tuner and performance wheel installations where the correct mounting hardware has been verified.
PERFORMANCE WHEEL HARDWARE | SSAUTOCHROME
Specialty wheel accessories, performance automotive components and aftermarket hardware for compatible import and tuner applications.
- BRAND NEW in box
WORK Racing RS Lug Nuts. Thread pitch: 12x1.5.
16 lug nuts with 4 locking nuts.
RED COLOR - WORK RS Type (Closed End) Red Replacement Lug Nuts
WORK RS ALUMINUM LOCK LUG NUTS SET RED 12X1.5 CIVIC
12x1.5 thread pitch fits most Acura, Honda, Toyota, Mazda, Mitsubishi, Isuzu, Daihatsu** - ** Please note that this serves as a general guide, but you should verify with your owners manual on the lug nut thread pitch of your specific vehicle, as it may differ within vehicle makes. If you are unsure of the thread pitch you require, please contact us directly before ordering.
- ** RS Type: DO NOT USE IMPACT WRENCH!
