Copper Turbo Oil Feed Restrictor Fitting For Many Turbos, GT35, T25, T28, T3, T4, T6
AN4 Fitting Size to Oil Line
M12 x1.0 Thread to Turbo
GT28RS
Note:
Different Turbo Has Different Oil Inlet Thread. This ONLY Fits M12 x1.0 Thread.
Oil Fitting Has Built in Restrictor to Supply Proper Oil Pressure for the Turbo Which is Critical for Normal Turbo Operation. Without Correct Restrictor, Turbo Oil Seal Might be Blown and Leaking Oil.
Our products are developed
and intended for off-road racing.
They may not be legal for use on public highways where pollution
control laws apply.
Due to the nature of the use of these products, no warranty
is implied or given.
