Prod.# Subaru Upgrade Turbo

• The TD05H-16G is a bolt-on upgrade for the WRX/STI
  TD05 16G bolt on turbo WRX 02-06 ej20 ej25 (Fits: WRX)
  XS TURBO IMPREZA WRX STI 02 - 04-07 EJ20 EJ25 GDA GDB
  Utilizing a Mitsubishi TD06 16G compressor wheel in a TD06 compressor housing capable of supporting 380 HP. The turbine section consists of a Mitsubishi TD05H high flow turbine wheel and shaft assembly for maximum low RPM boost response on the 2.0L and a 7cm 2 nozzle area turbine housing with an internal wastegate port and wastegate actuator calibrated at 11.2 PSI. The turbine housing is ported and polished in the turbine inlet throat and wastegate port areas to improve exhaust gas flow and boost control via the internal gate. The center housing contains a water jacket
  
• Internal wastegate set at Approx 11.2 Psi
  Oil Lub, Oil/Water Cool
  Compressor Wheel
  0.49 A/R Cold Side
  Ind: 48.3 mm
  Exd: 68 mm
  Trim: 50
  Turbiner Wheel
  Subaru Style 5 Bolt Flange
• Ind: 56 mm
  Exd: 49.20 mm
  This turbo is a direct bolt-on for all GC8, GDA, GDB EJ20 turbo engines.
  
• This is an excellent replacement turbo for those looking for substantial power gains while maintaining streetability.
• Shipping to, Alaska, Hawaii, Puerto Rico, Guam and the Virgin Islands, reflects shipping price to Canada,
  
• Also please note shipping fee to Eastern Europe, Australia, New Zealand and Africa is Extra-- with insurance! --
  
• Please either wait to get revised invoice or change ship fee before you send payment on either situations above!!

$279.00
INCLUDING SHIPPING - USA